Have you ever considered having a manger to celebrate Christmas? If you are looking to make a manger yourself, here is how we made ours.
Our daughter wanted to make her own headboard out of barn wood, so my husband asked his relative in Pennsylvania if they had any laying around that she could use. He blessed us with many planks of 100 year old wood that was harvested on the family land, which makes it have it own history for our family and beautiful. We decided to make another manger with our left over wood.
How to Make a Manger
Here is what you will need:
- 2 – 25 inches long wood, at least 8 inches wide
- 2 – 12 inches long wood, at least 8 inches wide
- 1 or 2 pieces of wood to make the bottom
- Angle tool
- A table saw or another saw to cut with
- Nail gun or hammer
My husband angled each cut 12.5 degrees. You can either use an angle tool, like above or an attachment on the table saw, like below, to easily do the cut.
Once you have two pieces for the long side (25 inches before the angel cut) and two pieces for the short sides (12 inches before the angle cut), you can begin to construct them together, using a nail gun or hammer and nails.
After you get the walls of the manger put together, you will need to put a bottom on it. Measure yours to be certain of the length and width needed. You can use one or two pieces to make the bottom. You can see that we used two pieces of our scrap wood to make our bottom.
That is all it takes to make a manger! It took us about an hour to put ours together and we absolutely love sharing the story of how we got the wood.
Check out Why a Manger Replaced Our Christmas Tree.